xkittenxsocksx
08-17-2007, 7:28 AM
Me and a few friends built a stable for some affluent faggots horses. It was part of a scheme we signed up for in college as an enrichment. We did use a few other people on certain things as I can not build trusses and also can not put on roofs like the local council wants.
http://content.imagesocket.com/thumbs/2_1_16c2.jpg
Slab laid after putting council required 2mtr holes for all securing points
http://content.imagesocket.com/thumbs/1_2e54.jpg
Footings bolted to concrete and filled with gravel to act as termite barrier.
http://content.imagesocket.com/thumbs/1_35e1.jpg
Compressed straw bails stacked onto footings to act as walls.
http://content.imagesocket.com/thumbs/41fa.jpg
Bails tensioned to get level. I counted 180 nuts that had to be turned many times to make sure the top plate was accurate.
http://content.imagesocket.com/thumbs/5333.jpg
http://content.imagesocket.com/thumbs/6e22.jpg
Outside was rendered by machine. Lime and sand for first coat and followed by a lime/sand/cement finish. It still cracked with drying.
http://content.imagesocket.com/thumbs/769e.jpg
Trusses on.
http://content.imagesocket.com/thumbs/8461.jpg
Inside was hand packed with a soil/water mix and then coated with a hand done lime render. The soil was taken from a paddock on the property.
http://content.imagesocket.com/thumbs/9443.jpg
Roof on. and colour samples on the render.
http://content.imagesocket.com/thumbs/2_1_106f9.jpg
So now we have a 18mtr by 12mtr stable for horses with three bays and a tack room. Some stopped to ask why we had built a house like this and was amazed when we said it was for horses.
I also forgot, the fences in the paddocks are split pine that we cut of a friends farm and hand drove into place. The fence its self is a poly material that is fantastic. Not that you're interested.
http://content.imagesocket.com/thumbs/2_1_16c2.jpg
Slab laid after putting council required 2mtr holes for all securing points
http://content.imagesocket.com/thumbs/1_2e54.jpg
Footings bolted to concrete and filled with gravel to act as termite barrier.
http://content.imagesocket.com/thumbs/1_35e1.jpg
Compressed straw bails stacked onto footings to act as walls.
http://content.imagesocket.com/thumbs/41fa.jpg
Bails tensioned to get level. I counted 180 nuts that had to be turned many times to make sure the top plate was accurate.
http://content.imagesocket.com/thumbs/5333.jpg
http://content.imagesocket.com/thumbs/6e22.jpg
Outside was rendered by machine. Lime and sand for first coat and followed by a lime/sand/cement finish. It still cracked with drying.
http://content.imagesocket.com/thumbs/769e.jpg
Trusses on.
http://content.imagesocket.com/thumbs/8461.jpg
Inside was hand packed with a soil/water mix and then coated with a hand done lime render. The soil was taken from a paddock on the property.
http://content.imagesocket.com/thumbs/9443.jpg
Roof on. and colour samples on the render.
http://content.imagesocket.com/thumbs/2_1_106f9.jpg
So now we have a 18mtr by 12mtr stable for horses with three bays and a tack room. Some stopped to ask why we had built a house like this and was amazed when we said it was for horses.
I also forgot, the fences in the paddocks are split pine that we cut of a friends farm and hand drove into place. The fence its self is a poly material that is fantastic. Not that you're interested.